ISL28197FHZ-T7
| Parameters | |
|---|---|
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Propagation Delay | 1.3 ms |
| Quiescent Current | 1.6μA |
| Response Time | 70000 ns |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 80pA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 2mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Input Current | 80pA |
| Height | 1.14mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Weight | 200.998119mg |
| Published | 2007 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
ISL28197FHZ-T7 Overview
A convenient packaging is provided in the form of SOT-23 .You can find 6 terminals of the comparator.The chip belongs to Comparators .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .The board includes 6 pins.Electronic comparator has 6 pins.There is 1.6μA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 1.6μA .The device can be operated with 5V power supplies.Input current to the device is limited to 80pA .Comparator electronics is not recommended to maintain a temperature above 125°C .Temperature lower than -40°C is not suitable for the it.Compatibility is defined as 5.5V when the comparator is operating at its maximum supply voltage.The comparator is capable of operating at a minimum supply voltage of 1.8V .For the output to be of high quality, 1 channels must cooperate together.Normal operation requires 5V operating supply voltage.
ISL28197FHZ-T7 Features
General Purpose IC
Quiescent Current: 1.6μA
ISL28197FHZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America) ISL28197FHZ-T7 linear comparators applications.
- Metering Systems
- General-Purpose Portable Devices
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
- Power Supervision
- DC/DC and AC/DC power supplies
- Body Control Modules
- Mobile Phones and Tablets
- Window Comparators
- Power management
