ISL28210FBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Operating Supply Current | 2.55mA |
| Slew Rate | 20 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2pA |
| Output Current per Channel | 50mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 12.5MHz |
| Gain Bandwidth Product | 12.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12500 kHz |
| Voltage Gain | 108dB |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 20V |
| Low-Bias | YES |
| Min Dual Supply Voltage | 4.5V |
| Bias Current-Max (IIB) @25C | 0.000005μA |
| Dual Supply Voltage | 18V |
| Input Voltage Noise Density | 14nV/sqrt Hz |
| Input Noise Current Density | 0.009pA/sqrt Hz |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ISL28210FBZ Overview
Op amp is packaged in SOIC case. An op amp of this type is a OPERATIONAL AMPLIFIER-type. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 300μV. Using an 2.55mA supply current, this operational amplifier ics can be operated. It is a member of the 108dB's 108dB family. There are 2 circuits on this op amp. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. You should not use op amp above 125°C . With regard to the supply voltage, this electrical component is capable of working from under 40V. This electrical part should be conducted under the dual supply voltage of 20V volts when you conduct this part.
ISL28210FBZ Features
8 Pins
supply voltage of 5V
108dB voltage gain
ISL28210FBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL28210FBZ Instrumentational OP Amps applications.
- Television
- Radar
- Voltage regulation circuit
- Integrator circuits
- Division circuits
- Multimedia playback equipment
- Polarized electrodes
- Portable docking station
- High-frequency data acquisition systems
- Laptop
