ISL28291FBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | ISL28291 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 2.6mA |
| Slew Rate | 17V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V ±1.5V~2.75V |
| Bandwidth | 61MHz |
| Average Bias Current-Max (IIB) | 7μA |
| Low-Offset | YES |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 270μV |
| Current - Output / Channel | 130mA |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 61MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Power | YES |
| Input Offset Current-Max (IIO) | 0.9μA |
| Common-mode Reject Ratio-Min | 78 dB |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
ISL28291FBZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. On this instrumentation amplifier, there are 2 circuits that are connected together. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This electronic part is recommended to be used with an 2.6mA supply for best performance.
ISL28291FBZ Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
ISL28291FBZ Applications
There are a lot of Renesas Electronics America Inc. ISL28291FBZ Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Inverse/same-phase proportional circuit
- ECG equipment
- earphone
- Addition operation circuits
- Blood pressure sensors
- Strain gauges
- Communication
- Digital cameras
