ISL28417FBZ-T7A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Operating Supply Voltage | 20V |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 4 |
| Max Supply Voltage | 40V |
| Operating Supply Current | 440μA |
| Nominal Supply Current | 530μA |
| Current - Output | 43mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 145 dB |
| Current - Input Bias | 80pA |
| Output Current per Channel | 43mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 143dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Min Dual Supply Voltage | 2.25V |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.7272mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL28417FBZ-T7A Overview
The linear amplifier is packaged in a SOIC case. An op amp ic of the OPERATIONAL AMPLIFIER type. In recent months, the number of terminations has approached 14. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, buffer amplifier rates 10μV voltage. Using an 440μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 143dB. A linear amplifier like this has 4 circuits on it. Using this buffer op amp requires a temperature of at least -40°C. You should only use op amp buffer at temperatures that are no higher than 125°C. The operating supply voltage of the buffer op amp is rated at 20V. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. The electrical part is capable of being powered by a voltage of under 40V, which means that it can be used with any voltage supply. In order to conduct this part, you will need to provide dual supply voltages of 20V volts.
ISL28417FBZ-T7A Features
supply voltage of 5V
143dB voltage gain
ISL28417FBZ-T7A Applications
There are a lot of Intersil (Renesas Electronics America) ISL28417FBZ-T7A Instrumentational OP Amps applications.
- Switching amplifier
- Signal amplification
- Subtraction operation circuits
- Micro signal measurement
- Signal transformation
- Power generator
- Video conversion and routing
- High-frequency data acquisition systems
- Broadcasting
- Precision measurement
