ISL28915FH6Z-T7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Cut Tape |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Propagation Delay | 260 μs |
| Quiescent Current | 600nA |
| Supply Current-Max | 0.0009mA |
| Response Time | 150000 ns |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 31pA |
| Input Offset Voltage (Vos) | 2mV |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL28915FH6Z-T7 Overview
Electronic comparator is packaged in SOT-23-6 for convenient transportation.Electronic comparator is shipped by Cut Tape .As you can see, the comparator has6 terminals.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 1 elements in it.Electronic comparator includes 6 pins.The comparator has 6 pins.A quiescent current of 600nA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.In order to run the device, there are only 5V power supplies required.Comparator electronics is not recommended to operate at a temperature higher than 125°C .Comparator electronics cannot be used at a temperature below -40°C .A comparator is designed to operate at a maximum supply voltage of 5.5V .A minimum supply voltage of 1.8V is permitted for this comparator.The maximum current that can be supplied to this part is 0.0009mA .
ISL28915FH6Z-T7 Features
General Purpose IC
Employing 1 elements
Quiescent Current: 600nA
ISL28915FH6Z-T7 Applications
There are a lot of Intersil (Renesas Electronics America) ISL28915FH6Z-T7 linear comparators applications.
- Window Comparators
- Mobile Communications
- Handheld Instruments
- Notebooks and PDAs
- Hand-Held Electronics
- Motor drives
- Power management
- Infotainment and Clusters
- High-Speed Sampling Circuits
- System control and monitoring
