ISL33003IRT2Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 8 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.3V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 4mA |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
ISL33003IRT2Z Overview
As the splitter is supplied by 2.5V voltage, it is capable of completing many demanding tasks in a short amount of time.With 8 pins, it is connected.The Surface Mount on the board allows it to be mounted on PCBs or other boards.In order for this power buffer to operate, a voltage of 4mA must be applied.A voltage higher than 5.5V should not be applied to the repeter. It is not recommended that you do so.A minimum of 2.3V is required for the splitter to start.Temperatures below -40°C are not suitable for it.It is not recommended to use a temperature higher than 85°C.
ISL33003IRT2Z Features
ISL33003IRT2Z Applications
There are a lot of Intersil (Renesas Electronics America) ISL33003IRT2Z Signal Buffers, Repeaters, Splitters applications.
- PECL-to-LVDS Translation
- Digital Cross-Connects
- Cable Repeaters
- Network Switches/Routers
- Data or Clock Signal Amplification
- Communications Switchers
- Industrial/Embedded PC
- Multidrop Buses
- DSLAMs
- Digital Crossconnects
