Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
MSOP |
Number of Pins |
8 |
Weight |
139.989945mg |
Published |
2006 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Supply Voltage-Max (Vsup) |
5.5V |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
2.3V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
4mA |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
ISL33003IUZ-T Overview
This power buffer comes packaged in MSOP so that it can be transported easily.It is possible to find 8 terminals on the op amp buffer of the assembly.The peak reflow temperature of it is NOT SPECIFIED.This splitter can be used for the completion of many demanding tasks as it is supplied by 2.7V voltage.The 8 pins are on it.It has a Surface Mount for mouting on PCB or other boards.Voltage 4mA is needed to operate this power buffer.A voltage higher than 5.5V should not be applied to the repeter. It is not recommended that you do so.The splitter must have at least 2.3V to be able to start up.A temperature lower than -40°C is not suitable for this spliter.Temperatures above 85°C should not be exceeded.
ISL33003IUZ-T Features
ISL33003IUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL33003IUZ-T Signal Buffers, Repeaters, Splitters applications.
- SATA SSDs or HDDs
- Add/Drop Muxes
- Desktop Computers
- Medical
- Digital Crossconnects
- Cellular Phone Base Stations
- Network Switches/Routers
- Industrial/Embedded PC
- Multidrop Buses
- DSLAMs