ISL43110IB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 1 |
| Operating Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 60ns |
| Drain to Source Resistance | 20Ohm |
| Normal Position | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43110IB Overview
Packed in SOIC, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Bulk. In total, there are 8 terminations. A 1 channel electronic part produces high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 8 series. Analog switches have 10Ohm internal resistance. It is a typical Multiplexer or Switches analog multiplexer. Digital switch that provides Single power at a cost-effective price. For this digital switch to work, 1μA current would suffice. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. Drain to Source resistance for this electronic component is 20Ohm. 1-bits are supported. To supply the switch device, a voltage of 2.4V must be applied.
ISL43110IB Features
1 Channels
1μA Supply Current
Drain-to-Source resistance: 20Ohm
1-Bit
ISL43110IB Applications
There are a lot of Intersil (Renesas Electronics America) ISL43110IB Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Wireless Local Loop
- SONET/SDH ADM
- Battery Powered Systems
- Digital access cross connects
- Cell phones
- DSLAMs
- Isolation
- Fault Tolerant Systems
- Precision data acquisition
