ISL43110IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Power Dissipation-Max | 5μW |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 60ns |
| Drain to Source Resistance | 20Ohm |
| Normal Position | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43110IBZ Overview
Presented in SOIC, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Bulk is used. In total, there have been 8 terminations. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. A 10Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 2.4V. It would be sufficient to run this analogue multiplexer with 1μA current. Putting voltage greater than 1μA on the multiplexer may cause damage. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Drain to Source resistance for this electronic component is 20Ohm. It is capable of carrying out 1-bit operation.
ISL43110IBZ Features
1 Channels
1μA Supply Current
Drain-to-Source resistance: 20Ohm
1-Bit
ISL43110IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL43110IBZ Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Intelligent PBX
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Sample hold systems
- Precision instrumentation
- Battery Powered Systems
- E1 Multiplexer
- Medical
- ATM
- Access Concentrators
