banner_page

ISL43110IBZ

80ns, 50ns SPST - NO 10Ohm DUAL Analog Switches 8 Pins 1nA 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-ISL43110IBZ
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 631
  • Description: 80ns, 50ns SPST - NO 10Ohm DUAL Analog Switches 8 Pins 1nA 3.3V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish MATTE TIN
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Channels 1
Number of Circuits 1
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 15pF 15pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 80ns, 50ns
Charge Injection 8pC
Switch-off Time-Max 60ns
Voltage - Supply, Single (V+) 2.4V~12V
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant

ISL43110IBZ Overview


Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. This electronic part offers high-quality output due to its 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. A total of 8 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 1 circuits. This analogue multiplexer requires a voltage of 2.4V~12V when it drains from a single voltage supply.

ISL43110IBZ Features


1 Channels
Switch Circuit: SPST - NO

ISL43110IBZ Applications


There are a lot of Rochester Electronics, LLC ISL43110IBZ Analog Switches & Multiplexers ICs applications.

  • Cell phones
  • Relay replacements
  • PBX interfaces
  • Digital cross connects (DSX-1)
  • Multiplexers
  • Multi-Line E1 Interface Cards
  • Battery Powered Instruments
  • SDH
  • Precision test equipment
  • FTTH

Write a review

Note: HTML is not translated!
    Bad           Good