ISL43111IBZ-T
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Power Dissipation-Max | 5μW |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 60ns |
| Normal Position | NC |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
ISL43111IBZ-T Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. In total, there are 8 terminations. High-quality output is provided by the electronic component's 1 channels. A 3.3V voltage supply should turn on and run the electronic component. It has an internal resistance of 10Ohm. The datasheets for the 8 pins explain the functions. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A analog switch ic that has a cost-effective Single supply type. 2.4V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 1μA. Put voltage above 1μA on the multiplexer to cause damage. Temperatures over 85°C should not be allowed for the multiplexer to operate. It is capable of carrying out 1-bit operation.
ISL43111IBZ-T Features
1 Channels
1μA Supply Current
1-Bit
ISL43111IBZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43111IBZ-T Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Optical Applications
- Wireless Local Loop
- Medical systems
- Cable Modem
- Automotive applications
- Digital cross connects (DSX-1)
- SONET/SDH ADM
- Modems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
