ISL43111IH-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Packaging | Cut Tape |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 60 ns |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43111IH-T Overview
This electronic part is conveniently packaged in SOT-23-5, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In total, there are 5 terminations. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. An electrical component like this is included in the 5 series. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for functions of 5 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 12V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.4V. This digital switch can be operated with a current of 1μA. Put voltage above 1μA on the multiplexer to cause damage. There is a voltage range of 9V operating voltages for the electrical part. Temperatures over 85°C should not be allowed for the multiplexer to operate. 1-bits are supported.
ISL43111IH-T Features
1 Channels
1μA Supply Current
1-Bit
ISL43111IH-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43111IH-T Analog Switches & Multiplexers ICs applications.
- High-Voltage
- T1/E1 Terminals
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microprocessor Controlled Analog Systems
- Communication systems
- Public switching systems
- Battery Powered Instruments
- Central office
- Multi-Line E1 Interface Cards
- ATM
