ISL43113IB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 20Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Max Supply Current | 25μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -3.3V |
| Turn-Off Delay Time | 65 ns |
| Max Dual Supply Voltage | 6V |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 20Ohm |
| Normal Position | NC |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43113IB Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Bulk is used. There are 8 terminations totally. A 2 channel electronic part produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 8 pins. Internally, this switch multiplexer has a resistance of 20Ohm. For functions related to 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. The analog switch ic is of the Dual supply type and is cost-effective. It would be sufficient to run this analogue multiplexer with 15μA current. A digital multiplexer may suffer damage if voltage is applied above 25μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. This electrical part is compatible with 6V operating voltages. A temperature above 85°C is not suitable for operation of the analogue multiplexer. The Drain to Source resistance of this electronic component is 20Ohm. It conducts in a 1-bit manner.
ISL43113IB Features
2 Channels
15μA Supply Current
Drain-to-Source resistance: 20Ohm
1-Bit
ISL43113IB Applications
There are a lot of Intersil (Renesas Electronics America) ISL43113IB Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Precision test equipment
- Ultrasound
- New designs requiring multiplexer functions
- Central office
- Precision instrumentation
- ISDN NT1/TA
- Communication systems
- PDAs
- Cross Connects
