ISL43113IBZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 15μA |
| Max Supply Current | 25μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -3.3V |
| Turn-Off Delay Time | 45 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 5V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 65ns |
| Normal Position | NC |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43113IBZ-T Overview
Packed in SOIC, the electronic component is convenient for shipping overseas. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. A 20Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 8 pins functions. Multiplexer or Switches is a typical switch device. The digital multiplexer has a low cost Dual supply. An operating current of 15μA would be sufficient for this switch device. Put voltage above 25μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. For dual power supplies, a voltage of at least 1.5V should be attached. Operating voltages range from 5V. The switches should not operate in an environment where the temperature is higher than 85°C. 1-bits are supported.
ISL43113IBZ-T Features
1 Channels
15μA Supply Current
1-Bit
ISL43113IBZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43113IBZ-T Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Wireless Local Loop
- Audio and video switching
- Optical Applications
- Access Concentrators
- HDTV
- Intelligent PBX
- CSU
- Imaging
- Digital Cross-Connects
