ISL43113IHZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Packaging | Cut Tape |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 5 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Operating Supply Current | 15μA |
| Max Supply Current | 25μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -3.3V |
| Turn-Off Delay Time | 45 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 5V |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43113IHZ-T Overview
Due to its SOT-23-5 packaging, the electronic part is convenient for international shipping. The advanced packaging method Cut Tape provides high reliability. In total, there are 5 terminations. This electronic part offers high-quality output due to its 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. An injection of 5 pins is performed into the body of the electrical component. It has an internal resistance of 20Ohm. Please refer to the datasheets for 5 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual supply type. This digital switch can be operated with a current of 15μA. A digital multiplexer may suffer damage if voltage is applied above 25μA. There is no problem with using dual supply voltage, but it should not exceed 6V. When using dual power supplies, you should attach at least 1.5V. The electrical part can be operated at 5V voltage levels. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. It can conduct in a 1-bit manner.
ISL43113IHZ-T Features
1 Channels
15μA Supply Current
1-Bit
ISL43113IHZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43113IHZ-T Analog Switches & Multiplexers ICs applications.
- RGB switches
- Signal routing between systems
- PCMCIA cards
- 65 V DACs
- Cable Modem
- Industrial
- High reliability control systems
- Power routing
- Audio and video routing
- Cross Connects
