ISL43120IH-T

DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 3.3V SOT-23-8

Manufacturer: Intersil (Renesas Electronics America)
Nocochips NO: 391-ISL43120IH-T
Package: SOT-23-8
Datasheet: PDF
Stock: 659
Description: DUAL Analog Switches BREAK-BEFORE-MAKE 8 Pins 3.3V SOT-23-8(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Packaging	Cut Tape
Published	2000
JESD-609 Code	e0
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1
Number of Terminations	8
Resistance	20Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	9V
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	100pA
Max Supply Current	1μA
Number of Bits	2
Throw Configuration	SPST
Turn On Delay Time	120 ns
Supply Type	Single
Turn-Off Delay Time	50 ns
Off-state Isolation-Nom	76 dB
On-state Resistance Match-Nom	0.8Ohm
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	1.45mm
Width	1.6mm
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

ISL43120IH-T Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-8. This high-reliability packaging method uses advanced packaging methods Cut Tape. There are 8 terminations totally. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. This electrical component is included in the 8 series of products. An switch multiplexer with 20Ohm internal resistance has a value of 20Ohm. For details about the functions of 8 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2.7V. In order to operate this switch device, it would need a current of 1μA. Putting voltage greater than 1μA on the multiplexer may cause damage. There are SEPARATE OUTPUT outputs on this analog switch ic. The electronic component can function from 9V. Temperatures over 85°C should not be allowed for the multiplexer to operate. It is capable of carrying out 2-bit operation.