ISL43140IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 65Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16, 16 |
| JESD-30 Code | R-PDSO-G16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| On-state Resistance Match-Nom | 2Ohm |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 30ns |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43140IBZ Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. In order to provide high reliability, an advanced packaging method Bulk is used. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16, 16 pins. As far as internal resistance is concerned, it has 65Ohm. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Dual, Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 50nA. Putting voltage greater than 1μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 2V if you are using dual power supplies. In an environment with a temperature higher than 85°C, the digital switches should not operate. 4-bit operation is possible.
ISL43140IBZ Features
1 Channels
50nA Supply Current
4-Bit
ISL43140IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL43140IBZ Analog Switches & Multiplexers ICs applications.
- Cell phones
- 65 V DACs
- Medical systems
- Power routing
- Data Acquisition Systems
- Central office
- Industrial and process control systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Precision test equipment
- Fiber to the Home
