ISL43142IBZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 65Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16, 16 |
| JESD-30 Code | R-PDSO-G16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| On-state Resistance Match-Nom | 2Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 30ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43142IBZ Overview
The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Bulk. There are 16 terminations totally. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 16, 16 series of products. There is 65Ohm internal resistance in this digital multiplexer. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 50nA current. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. For dual power supplies, a voltage of at least 2V should be attached. During operation, the multiplexer should not be exposed to a temperature above 85°C. It is able to conduct in a 4-bit way.
ISL43142IBZ Features
1 Channels
50nA Supply Current
4-Bit
ISL43142IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL43142IBZ Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Battery Powered Instruments
- Channelized and Unchannelized DS3 applications
- Sample hold systems
- Communication systems
- High speed data transmission line cards
- Video switching
- Audio and video routing
- Sample-and-hold systems
- Audio and video switching
