ISL43640IRZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFN EP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 50Ohm |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 100pA |
| Nominal Supply Current | 100pA |
| Max Supply Current | 1μA |
| Throw Configuration | 4PST |
| Propagation Delay | 70 ns |
| Turn On Delay Time | 155 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 60 ns |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 1Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43640IRZ Overview
As the electronic part is packed in QFN EP, international shipping is convenient. High reliability is provided by advanced packaging method Bulk. In total, there are 16 terminations. A 1 channel electronic part produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. A 4 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 50Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. The switch device would be able to operate with 100pA current. When the digital multiplexer is charged above 1μA, damage can occur. The electrical part can be operated at 9V voltage levels. The switches should not operate in an environment where the temperature is higher than 85°C.
ISL43640IRZ Features
1 Channels
100pA Supply Current
ISL43640IRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL43640IRZ Analog Switches & Multiplexers ICs applications.
- Video switching
- Microprocessor Controlled Analog Systems
- ISDN NT1/TA
- PBX interfaces
- Ultrasound
- Central office
- Industrial and process control systems
- E1 Network Equipment
- Microwave transmission systems
- Video signal routing
