ISL43840IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/12/+-2/+-6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 1μA |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Off-state Isolation-Nom | 92 dB |
| Neg Supply Voltage-Max (Vsup) | -6V |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 35ns |
| Neg Supply Voltage-Min (Vsup) | -2V |
| Height Seated (Max) | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43840IR Overview
This high-reliability packaging method uses advanced packaging methods Bulk. There are 20 terminations totally. A high-quality output is provided by the electrical component's 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 20 pins. In this multiplexer, the internal resistance is 45Ohm. Please refer to the datasheets for 20 pins functions. This switch device is a typical Multiplexer or Switches. A cost-effective Dual, Single supply type analogue multiplexer. The switch device would be able to operate with 1μA current. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In an environment with a temperature higher than 85°C, the digital switches should not operate. This digital multiplexer requires 2V voltage as a minimum supply voltage.
ISL43840IR Features
4 Channels
1μA Supply Current
ISL43840IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43840IR Analog Switches & Multiplexers ICs applications.
- Transmit
- Voice over IP/DSL – Integrated Access Devices, Smart
- Residential Gateways, Home Gateway/Router
- Relay Replacement
- PDAs
- Communications systems
- Imaging
- Channelized and Unchannelized DS3 applications
- Data switching
- Cross Connects
