ISL43L120IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L120IR Overview
To ensure high reliability, a new packaging method Bulk is used. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. It is part of the design of the 8 series that this electronic component is included. It has an internal resistance of 250mOhm. This switch device is a typical Multiplexer or Switches. Analogue multiplexer with a Single supply type that is cost-effective. For this multiplexer to operate, 30nA current would be sufficient. With a SPDT analog IC integrated into the board. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Temperatures over 85°C should not be allowed for the multiplexer to operate. It conducts in a 2-bit manner. Analog switch ics need a voltage of 1.65V to be powered.
ISL43L120IR Features
2 Channels
30nA Supply Current
2-Bit
ISL43L120IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L120IR Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Multiplexers
- Digital access cross connects
- T1/E1 Terminals
- New designs requiring multiplexer functions
- Microprocessor Controlled Analog Systems
- Microwave transmission systems
- Signal routing between systems
- Audio/video switches
- Video switching
