banner_page

ISL43L120IRZ

DUAL Analog Switches 1.8V


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-ISL43L120IRZ
  • Package: -
  • Datasheet: PDF
  • Stock: 232
  • Description: DUAL Analog Switches 1.8V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Number of Pins 8
Published 2001
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 8
Resistance 250mOhm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Output SEPARATE OUTPUT
Temperature Grade INDUSTRIAL
Number of Channels 2
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Analog IC - Other Type SPDT
Operating Supply Current 30nA
Max Supply Current 30nA
Throw Configuration SPST
Turn On Delay Time 25 ns
Supply Type Single
Turn-Off Delay Time 25 ns
Off-state Isolation-Nom 62 dB
On-state Resistance Match-Nom 0.005Ohm
Switch-on Time-Max 40ns
Switch-off Time-Max 35ns
Normal Position NO
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISL43L120IRZ Overview


The total number of terminations is 8. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. The internal resistance of this digital multiplexer is 250mOhm. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. For this digital switch to work, 30nA current would suffice. If you put voltage higher than 30nA on the digital multiplexer, damage may occur. There is an integrated analog IC SPDT in the module. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. An environment with a temperature greater than 85°C should not be used to operate the digital switches.

ISL43L120IRZ Features


2 Channels
30nA Supply Current

ISL43L120IRZ Applications


There are a lot of Intersil (Renesas Electronics America) ISL43L120IRZ Analog Switches & Multiplexers ICs applications.

  • ATM
  • Industrial control systems
  • E1 Multiplexer
  • Communication systems
  • Fault Tolerant Systems
  • PDAs
  • Industrial and process control systems
  • Cable Modem
  • Access Concentrators
  • RGB switches

Write a review

Note: HTML is not translated!
    Bad           Good