ISL43L120IU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L120IU Overview
Due to its MSOP packaging, the electronic part is convenient for international shipping. The advanced packaging method Bulk provides high reliability. A total of 8 terminations have been recorded. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. This electrical component is included in the 8 series of products. It has an internal resistance of 250mOhm. Datasheets for functions of 8 pins are available. This switch device is a typical Multiplexer or Switches. A cost-effective Single supply type analogue multiplexer. This digital switch can be operated with a current of 30nA. This product is integrated with an analog integrated circuit (IC) of type SPDT. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Temperatures above 85°C should not be used to operate the switches. It is capable of carrying out 2-bit operation. Analog switch ics need a voltage of 1.65V to be powered.
ISL43L120IU Features
2 Channels
30nA Supply Current
2-Bit
ISL43L120IU Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L120IU Analog Switches & Multiplexers ICs applications.
- PDAs
- Isolation
- CSU
- Communication systems
- Data Acquisition Systems
- Transmit
- SONET
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Industrial and process control systems
- Cellular phones
