Parameters |
Mount |
Surface Mount |
Package / Case |
MSOP |
Published |
2001 |
JESD-609 Code |
e0 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
Resistance |
250mOhm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
JESD-30 Code |
S-PDSO-G8 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
1.8/3V |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
1.65V |
Number of Channels |
2 |
Analog IC - Other Type |
SPDT |
Operating Supply Current |
30nA |
Number of Bits |
2 |
Throw Configuration |
SPST |
Supply Type |
Single |
Off-state Isolation-Nom |
62 dB |
On-state Resistance Match-Nom |
0.005Ohm |
Switch-on Time-Max |
40ns |
Switch-off Time-Max |
35ns |
Normal Position |
NO |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
ISL43L120IU-T Overview
As the electronic part is packed in MSOP, international shipping is convenient. There are 8 terminations totally. A high-quality output is provided by the electrical component's 2 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 8 series. It has an internal resistance of 250mOhm. This switch device is a typical Multiplexer or Switches. The digital multiplexer has a low cost Single supply. This digital switch can be operated with a current of 30nA. Integrated with an analog IC SPDT. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. It can conduct 2-bit signals. It requires a minimum voltage of 1.65V to supply the switch device.
ISL43L120IU-T Features
2 Channels
30nA Supply Current
2-Bit
ISL43L120IU-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L120IU-T Analog Switches & Multiplexers ICs applications.
- Transmit
- Routers
- ATM
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Audio/video switches
- Data Acquisition Systems
- New designs requiring multiplexer functions
- Digital Cross-Connects
- Cable PC
- Multi-Line E1 Interface Cards