ISL43L121IR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPDT |
| On-State Resistance (Max) | 250mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 182pF 182pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | -125pC |
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -94dB @ 100kHz |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L121IR Overview
The electrical component comes in 8-WDFN Exposed Pad packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. In total, there are 8 terminations. The electronic part delivers high-quality output through its 2 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 8 series. Unlike digital switches, these are based on SPST - NC switching circuits. It consists of 2 circuits. Analogue multiplexers require a 1.65V~3.6V voltage to drain from a single voltage supply. There is an integrated analog IC SPDT in the module.
ISL43L121IR Features
2 Channels
Switch Circuit: SPST - NC
ISL43L121IR Applications
There are a lot of Rochester Electronics, LLC ISL43L121IR Analog Switches & Multiplexers ICs applications.
- Medical
- Fault Tolerant Systems
- SONET/SDH ADM
- SDH
- Microprocessor controlled systems
- Central office
- High-Voltage
- Isolation
- Access Concentrators
- Audio and video routing
