ISL43L121IU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NC |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L121IU Overview
Presented in MSOP, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Bulk. Total terminations are 8. The electronic part provides high-quality output because it has 2 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 8 series. The internal resistance of this digital multiplexer is 250mOhm. The datasheets for the 8 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Analog switch ics with Single supply type are cost-effective. For this digital switch to work, 30nA current would suffice. Integrated with SPDT analog IC. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. During operation, the multiplexer should not be exposed to a temperature above 85°C. It is able to conduct in a 2-bit way. For the switch device to function, a voltage of 1.65V is required.
ISL43L121IU Features
2 Channels
30nA Supply Current
2-Bit
ISL43L121IU Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L121IU Analog Switches & Multiplexers ICs applications.
- Video switching
- DSLAMs
- Avionics
- Remote Powered Equipment
- Fiber In The Loop (FITL)
- Sample-and-hold systems
- Communication systems
- PBX interfaces
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Video signal routing
