Parameters |
Mount |
Surface Mount |
Package / Case |
MSOP |
Number of Pins |
8 |
Packaging |
Tape & Reel |
Published |
2001 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
Resistance |
250mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Output |
SEPARATE OUTPUT |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Analog IC - Other Type |
SPDT |
Operating Supply Current |
30nA |
Max Supply Current |
30nA |
Throw Configuration |
SPST |
Turn On Delay Time |
25 ns |
Supply Type |
Single |
Turn-Off Delay Time |
25 ns |
Off-state Isolation-Nom |
62 dB |
On-state Resistance Match-Nom |
0.005Ohm |
Switch-on Time-Max |
40ns |
Switch-off Time-Max |
35ns |
Normal Position |
NC |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
ISL43L121IUZ-T Overview
Due to its MSOP packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel is used. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. This digital multiplexer has 250mOhm internal resistance. You can find the functions of the 8 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. In order to operate this switch device, it would need a current of 30nA. A digital multiplexer may suffer damage if voltage is applied above 30nA. A SPDT analog IC is integrated into the board. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Temperatures above 85°C should not be used to operate the switches.
ISL43L121IUZ-T Features
2 Channels
30nA Supply Current
ISL43L121IUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L121IUZ-T Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Battery Powered Systems
- Precision test equipment
- Fiber In The Loop (FITL)
- Relay replacements
- Data switching
- E1 Network Equipment
- High speed data transmission line cards
- Precision instrumentation
- Central office