ISL43L122IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L122IR Overview
The advanced packaging method Bulk provides high reliability. In total, there have been 8 terminations. High-quality output is provided by the electronic component's 2 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An injection of 8 pins is performed into the body of the electrical component. This digital multiplexer has 250mOhm internal resistance. The analog multiplexer shown here is a typical Multiplexer or Switches. A analog switch ic that has a cost-effective Single supply type. It would be sufficient to run this analogue multiplexer with 30nA current. It is integrated with SPDT analog ICs. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. A temperature above 85°C is not suitable for operation of the analogue multiplexer. It can conduct in a 2-bit manner. To power the multiplexer ics, the voltage must be set at 1.65V.
ISL43L122IR Features
2 Channels
30nA Supply Current
2-Bit
ISL43L122IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L122IR Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- DVD-R
- High speed data transmission line cards
- SONET
- Fiber In The Loop (FITL)
- Cellular phones
- SDH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Precision test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
