ISL43L122IR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPDT |
| On-State Resistance (Max) | 250mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 182pF 182pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | -125pC |
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -94dB @ 100kHz |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L122IR Overview
Shipping overseas is convenient due to the electrical component's packing in 8-WDFN Exposed Pad. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 8. A electrical component with 2 channels is capable of high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 8 pins. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Circuits number 2 make up this analogue multiplexer. A voltage of 1.65V~3.6V is required for this switch device, which drains from a single voltage source. Integrated with an analog IC SPDT.
ISL43L122IR Features
2 Channels
Switch Circuit: SPST - NO/NC
ISL43L122IR Applications
There are a lot of Rochester Electronics, LLC ISL43L122IR Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Mechanical reed relay replacement
- PBXs
- E1 Multiplexer
- Precision test equipment
- T1/E1 Terminals
- High-Voltage
- SONET/SDH ADM
- Relay replacements
- Public switching systems
