ISL43L122IU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L122IU Overview
The electrical component comes in MSOP packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Bulk. In total, 8 terminations have occurred. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. This electrical component is included in the 8 series of products. Internally, this switch multiplexer has a resistance of 250mOhm. The datasheets for the 8 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. An effective Single supply digital multiplexer. For this multiplexer to operate, 30nA current would be sufficient. Integrated with SPDT analog IC. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Temperatures over 85°C should not be allowed for the multiplexer to operate. It can conduct in a 2-bit manner. To power the multiplexer ics, the voltage must be set at 1.65V.
ISL43L122IU Features
2 Channels
30nA Supply Current
2-Bit
ISL43L122IU Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L122IU Analog Switches & Multiplexers ICs applications.
- Cell phones
- PDAs
- Voice over IP/DSL – Integrated Access Devices, Smart
- Access Concentrators
- ISDN NT1/TA
- Wireless Local Loop
- CSU
- High reliability control systems
- Isolation
- Fault Tolerant Systems
