ISL43L122IU-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-off Time-Max | 35ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L122IU-T Overview
Shipping overseas is convenient due to the electrical component's packing in MSOP. There are 8 terminations totally. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. A total of 8 pins are injected into the electrical part body. In this multiplexer, the internal resistance is 250mOhm. The functions of 8 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Analogue multiplexer with a Single supply type that is cost-effective. 30nA current would be enough for this multiplexer to operate. It is integrated with SPDT analog ICs. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. Its conductivity is 4-bit. In order to power the analogue multiplexer, it requires an input voltage of 1.65V volts.
ISL43L122IU-T Features
2 Channels
30nA Supply Current
4-Bit
ISL43L122IU-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L122IU-T Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Fault Tolerant Systems
- Cross Connects
- Public switching systems
- DVD-R
- Relay replacements
- Sample-and-hold systems
- New designs requiring multiplexer functions
- Audio and video routing
- Automatic test equipment
