ISL43L220IR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-N10 |
| Supply Voltage-Max (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 350mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 60nA |
| Channel Capacitance (CS(off), CD(off)) | 115pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 17ns, 10ns |
| Charge Injection | 128pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -95dB @ 100kHz |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 1.1V~4.5V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L220IR Overview
The electronic component is convenient to ship overseas because it is packed in a 10-WFDFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 10. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 10 pins are injected into the body of the electronic part. A SPDT switching circuit is used for these analog switches. There are 2 circuits in this switch device. Using a single voltage supply, this switch device consumes 1.1V~4.5V volts. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
ISL43L220IR Features
1 Channels
Switch Circuit: SPDT
ISL43L220IR Applications
There are a lot of Rochester Electronics, LLC ISL43L220IR Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Digital cross connects (DSX-1)
- Data switching
- Multiplexers
- High-Voltage
- Relay replacements
- SDH/SONET multiplexers
- PCMCIA cards
- PDAs
- PBXs
