ISL43L410IUZ-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL43L410 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 115pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 20ns, 12ns |
| Charge Injection | 95pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -95dB @ 100kHz |
| Switch-on Time-Max | 33ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
ISL43L410IUZ-T Overview
Due to its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 2:2 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 2 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. DPDT switching circuits are used in these analog switch ics. This multiplexer is composed of 1 circuits. Use ISL43L410 to search for variants of the digital switches. Analogue multiplexers require a 1.65V~3.6V voltage to drain from a single voltage supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
ISL43L410IUZ-T Features
2 Channels
Switch Circuit: DPDT
ISL43L410IUZ-T Applications
There are a lot of Renesas Electronics America Inc. ISL43L410IUZ-T Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Digital Cross-Connects
- CSU
- Digital cross connects (DSX-1)
- Fiber to the Home
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Channelized and Unchannelized DS3 applications
- Intelligent PBX
- Data switching
- Video switching
