ISL43L710IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 1 |
| Analog IC - Other Type | DPST |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L710IR Overview
A high level of reliability can be achieved through the use of an advanced packaging method Bulk. The total number of terminations is 8. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the electrical part body. It has an internal resistance of 250mOhm. In this analog multiplexer, the value is Multiplexer or Switches. Analog switch ics with Single supply type are cost-effective. An operating current of 30nA would be sufficient for this switch device. There is an analog IC DPST integrated with this board. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A temperature above 85°C is not suitable for operation of the analogue multiplexer. 2-bits are supported. This analog switch ic needs a voltage of 1.65V as its minimum supply voltage.
ISL43L710IR Features
1 Channels
30nA Supply Current
2-Bit
ISL43L710IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L710IR Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Communication systems
- Communication systems
- SDH/SONET multiplexers
- Avionics
- Avionics test equipment
- USB 1.1 signal switching circuits
- Frame Relay Equipment
- Multiplexers
- FTTH
