ISL43L711IR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DPST |
| On-State Resistance (Max) | 250mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 182pF 182pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | -125pC |
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -94dB @ 100kHz |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L711IR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-WDFN Exposed Pad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An electrical component of this type can be found in the 8 series. Unlike digital switches, these are based on SPST - NC switching circuits. There are 2 circuits in this switch device. The voltage required by this switch device is 1.65V~3.6V, draining from a single voltage supply. This product is integrated with an analog integrated circuit (IC) of type DPST.
ISL43L711IR Features
1 Channels
Switch Circuit: SPST - NC
ISL43L711IR Applications
There are a lot of Rochester Electronics, LLC ISL43L711IR Analog Switches & Multiplexers ICs applications.
- Cell phones
- Power routing
- Medical
- Industrial control systems
- Fiber In The Loop (FITL)
- ATM
- Optical Applications
- Fault Tolerant Systems
- Precision instrumentation
- ISDN NT1/TA
