ISL43L712IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 1 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L712IR Overview
High reliability is achieved by using advanced packaging method Bulk. Totally, there are 8 terminations. High-quality output is provided by the electronic component's 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 8 series. The internal resistance of this digital multiplexer is 250mOhm. There is a standard Multiplexer or Switches analogue multiplexer here. Analog switch ics with Single supply type are cost-effective. The switch device would be able to operate with 30nA current. There is an analog IC SPDT integrated with this board. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. An environment with a temperature greater than 85°C should not be used to operate the digital switches. The switch device is capable of conducting in a 2-bit mode. In order to power the analogue multiplexer, it requires an input voltage of 1.65V volts.
ISL43L712IR Features
1 Channels
30nA Supply Current
2-Bit
ISL43L712IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L712IR Analog Switches & Multiplexers ICs applications.
- Optical Applications
- E1 Multiplexer
- Digital cross connects (DSX-1)
- Wireless Local Loop
- Precision test equipment
- Access Concentrators
- Private Branch Exchange (PBX)
- SONET
- Battery-powered systems
- Communication systems
