Parameters |
Mount |
Surface Mount |
Package / Case |
MSOP |
Number of Pins |
8 |
Packaging |
Bulk |
Published |
2001 |
JESD-609 Code |
e0 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
Resistance |
250mOhm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
3.6V |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
1.65V |
Number of Channels |
1 |
Analog IC - Other Type |
SPDT |
Operating Supply Current |
30nA |
Number of Bits |
2 |
Throw Configuration |
SPST |
Supply Type |
Single |
Off-state Isolation-Nom |
62 dB |
On-state Resistance Match-Nom |
0.005Ohm |
Switch-on Time-Max |
40ns |
Switch-off Time-Max |
35ns |
Normal Position |
NO/NC |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ISL43L712IU Overview
Presented in MSOP, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Bulk is used. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. There are 8 pins injected into the electronic part body. Internally, this switch multiplexer has a resistance of 250mOhm. Datasheets for 8 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. A cost-effective Single supply type analogue multiplexer. This multiplexer would work with 30nA current. It is integrated with a SPDT analog IC. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. In an environment with a temperature higher than 85°C, the digital switches should not operate. 2-bit conductivity is possible. In order to power the analogue multiplexer, it requires an input voltage of 1.65V volts.
ISL43L712IU Features
1 Channels
30nA Supply Current
2-Bit
ISL43L712IU Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L712IU Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- T1/E1 Terminals
- Optical Applications
- Precision test equipment
- 65 V DACs
- Avionics and Military Systems
- Medical
- Precision data acquisition
- Automatic test equipment
- New designs requiring multiplexer functions