ISL43L712IU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPDT |
| On-State Resistance (Max) | 250mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 182pF 182pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | -125pC |
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -94dB @ 100kHz |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L712IU Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 2. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. A SPDT analog IC is integrated into the board.
ISL43L712IU Features
1 Channels
Switch Circuit: SPST - NO/NC
ISL43L712IU Applications
There are a lot of Rochester Electronics, LLC ISL43L712IU Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Digital access cross connects
- Isolation
- Fiber to the Home
- PBXs
- Medical
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PBX interfaces
- E1 Multiplexer
