ISL43L840IV-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 750mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 4 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 50nA |
| Number of Bits | 2 |
| Throw Configuration | 4PST |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Off-state Isolation-Nom | 65 dB |
| On-state Resistance Match-Nom | 0.12Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L840IV-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in TSSOP. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. An 2.7V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. It has an internal resistance of 750mOhm. It is a typical Multiplexer or Switches analog multiplexer. A cost-effective Single supply type analogue multiplexer. In order to operate this switch device, it would need a current of 50nA. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. During operation, the multiplexer should not be exposed to a temperature above 85°C. It conducts in a 2-bit manner. To supply the switch device, a voltage of 1.6V must be applied.
ISL43L840IV-T Features
4 Channels
50nA Supply Current
2-Bit
ISL43L840IV-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L840IV-T Analog Switches & Multiplexers ICs applications.
- Industrial
- Video switching
- SDH
- High-Voltage
- Avionics and Military Systems
- ISDN NT1/TA
- PBX interfaces
- CSU
- Microwave transmission systems
- Video signal routing
