ISL5122IB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 100pA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 1Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO/NC |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL5122IB Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. Advanced packaging method Bulk is used to provide high reliability. There are 8 terminations totally. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. Internally, this switch multiplexer has a resistance of 30Ohm. This switch device is a typical Multiplexer or Switches. A analog switch ic that has a cost-effective Single supply type. This multiplexer would work with 100pA current. There are SEPARATE OUTPUT outputs on this analog switch ic. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. It conducts in a 2-bit manner. Providing power to the analogue multiplexer requires a voltage of 3VV.
ISL5122IB Features
1 Channels
100pA Supply Current
2-Bit
ISL5122IB Applications
There are a lot of Intersil (Renesas Electronics America) ISL5122IB Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Mechanical reed relay replacement
- Microprocessor Controlled Analog Systems
- New designs requiring multiplexer functions
- Channelized and Unchannelized DS3 applications
- Private Branch Exchange (PBX)
- Avionics and Military Systems
- Frame Relay Equipment
- PCMCIA cards
- 65 V DACs
