ISL5123CBZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 1Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL5123CBZ Overview
The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Bulk is used. Total terminations are 8. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. As far as internal resistance is concerned, it has 30Ohm. For functions related to 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. The digital multiplexer has a low cost Single supply. 2.7V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 100pA current. When the digital multiplexer is charged above 1μA, damage can occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. The switch device is capable of conducting in a 1-bit mode.
ISL5123CBZ Features
1 Channels
100pA Supply Current
1-Bit
ISL5123CBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL5123CBZ Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Battery Powered Instruments
- Communication systems
- Data Acquisition Systems
- SONET/SDH ADM
- Remote wireless modules
- PDH Multiplexers
- Channelized and Unchannelized DS3 applications
- Digital cross connects (DSX-1)
- DVD-R
