banner_page

ISL54051IHZ-T

DUAL Analog Switches BREAK-BEFORE-MAKE 3V SOT-23-6


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-ISL54051IHZ-T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 299
  • Description: DUAL Analog Switches BREAK-BEFORE-MAKE 3V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Published 2001
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 2
Number of Terminations 6
Resistance 860mOhm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.95mm
Power Supplies 1.8/5V
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Operating Supply Current 75nA
Max Supply Current 100nA
Throw Configuration SPST
Turn On Delay Time 29 ns
Supply Type Single
Turn-Off Delay Time 12 ns
Off-state Isolation-Nom 80 dB
On-state Resistance Match-Nom 0.33Ohm
Switching BREAK-BEFORE-MAKE
Normal Position NO
Height Seated (Max) 1.45mm
Length 2.9mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISL54051IHZ-T Overview


As the electronic part is packed in SOT-23-6, international shipping is convenient. There are 6 terminations totally. High-quality output is provided by the electronic component's 1 channels. A 3V voltage supply should turn on and run the electronic component. Internally, this switch multiplexer has a resistance of 860mOhm. Datasheets for 6 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. There should be 1.8V voltage fed to the electrical part below 1.8V. The analogue multiplexer could operate on 75nA current. The analogue multiplexer may be damaged if voltage is greater than 100nA. An environment with a temperature greater than 85°C should not be used to operate the digital switches.

ISL54051IHZ-T Features


1 Channels
75nA Supply Current

ISL54051IHZ-T Applications


There are a lot of Intersil (Renesas Electronics America) ISL54051IHZ-T Analog Switches & Multiplexers ICs applications.

  • DSUs
  • Cross Connects
  • Sample hold systems
  • Medical Instrumentation
  • SONET
  • Cell phones
  • Power routing
  • Battery Powered Instruments
  • Central office
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads

Write a review

Note: HTML is not translated!
    Bad           Good