banner_page

ISL54057IRUZ-T

QUAD Analog Switches BREAK-BEFORE-MAKE 16 Pins 3V


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-ISL54057IRUZ-T
  • Package: -
  • Datasheet: PDF
  • Stock: 755
  • Description: QUAD Analog Switches BREAK-BEFORE-MAKE 16 Pins 3V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Number of Pins 16
Published 2006
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
Resistance 750mOhm
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 16
Operating Supply Voltage 3V
Temperature Grade INDUSTRIAL
Number of Channels 2
Number of Circuits 1
Max Supply Voltage 3.6V
Min Supply Voltage 1.6V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Operating Supply Current 50nA
Max Supply Current 50nA
Propagation Delay 35 ns
Turn On Delay Time 34 ns
Supply Type Single
Turn-Off Delay Time 26 ns
Off-state Isolation-Nom 65 dB
On-state Resistance Match-Nom 0.09Ohm
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.3A
Height Seated (Max) 0.55mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISL54057IRUZ-T Overview


There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. There are 1 circuits in this multiplexer. There is 750mOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 3.6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 1.6V should be applied to the electronic component. This multiplexer would work with 50nA current. It may damage the digital multiplexer if the voltage is higher than 50nA. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. The electronic component can function from 3V. The switches should not operate in an environment where the temperature is higher than 85°C.

ISL54057IRUZ-T Features


2 Channels
50nA Supply Current

ISL54057IRUZ-T Applications


There are a lot of Intersil (Renesas Electronics America) ISL54057IRUZ-T Analog Switches & Multiplexers ICs applications.

  • Residential Gateways, Home Gateway/Router
  • Central office
  • SDH/SONET multiplexers
  • Microprocessor Controlled Analog Systems
  • Medical systems
  • New designs requiring multiplexer functions
  • Sample-and-hold systems
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • CSU
  • Audio and video switching

Write a review

Note: HTML is not translated!
    Bad           Good