ISL54062IRUZ-T
| Parameters | |
|---|---|
| Max Supply Current | 100nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 16 ns |
| -3db Bandwidth | 60MHz |
| Off-state Isolation-Nom | 60 dB |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 0.55mm |
| Length | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 10 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 550mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20nA |
ISL54062IRUZ-T Overview
A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel. In total, there have been 10 terminations. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 2 circuits in this switch device. An switch multiplexer with 550mOhm internal resistance has a value of 550mOhm. The functions of 10 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6.5V. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.8V. In order to operate this switch device, it would need a current of 20nA. Put voltage above 100nA on the multiplexer to cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A temperature above 85°C is not suitable for operation of the analogue multiplexer.
ISL54062IRUZ-T Features
1 Channels
20nA Supply Current
-3db Bandwidth: 60MHz
ISL54062IRUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL54062IRUZ-T Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- SDH
- Medical Instrumentation
- PDH Multiplexers
- Cross Connects
- Fault Tolerant Systems
- Communication systems
- Precision data acquisition
- Video switching
- Medical
