ISL54063IRUZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 10 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 550mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 10 ns |
| Off-state Isolation-Nom | 60 dB |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 0.55mm |
| Length | 1.8mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL54063IRUZ-T Overview
This high-reliability packaging method uses advanced packaging methods Tape & Reel. 10 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. As far as internal resistance is concerned, it has 550mOhm. You can find the functions of the 10 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6.5V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.8V as the lowest voltage for the electrical part. An operating current of 20nA would be sufficient for this switch device. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Temperatures above 85°C should not be used to operate the switches.
ISL54063IRUZ-T Features
1 Channels
20nA Supply Current
ISL54063IRUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL54063IRUZ-T Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Access Concentrators
- DSLAMs
- High-Voltage
- ISDN NT1/TA
- MP3 players
- Optical Applications
- Data switching
- Intelligent PBX
- Ultrasound
