banner_page

ISL54064IRUZ-T

QUAD Analog Switches BREAK-BEFORE-MAKE 3V


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-ISL54064IRUZ-T
  • Package: -
  • Datasheet: PDF
  • Stock: 433
  • Description: QUAD Analog Switches BREAK-BEFORE-MAKE 3V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Number of Pins 10
Packaging Tape & Reel
Published 2001
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 10
Resistance 550mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.4mm
Output SEPARATE OUTPUT
Power Supplies 1.8/5V
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 6.5V
Min Supply Voltage 1.8V
Operating Supply Current 20nA
Max Supply Current 100nA
Throw Configuration SPST
Turn On Delay Time 35 ns
Supply Type Single
Turn-Off Delay Time 10 ns
Off-state Isolation-Nom 60 dB
On-state Resistance Match-Nom 0.03Ohm
Switching BREAK-BEFORE-MAKE
Normal Position NC
Height Seated (Max) 0.55mm
Length 1.8mm
Width 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISL54064IRUZ-T Overview


High reliability is achieved by using advanced packaging method Tape & Reel. In total, there are 10 terminations. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is 550mOhm internal resistance in this digital multiplexer. Datasheets for functions of 10 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6.5V. A analog switch ic that has a cost-effective Single supply type. There should be 1.8V voltage fed to the electrical part below 1.8V. The switch device would be able to operate with 20nA current. A digital multiplexer may suffer damage if voltage is applied above 100nA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.

ISL54064IRUZ-T Features


1 Channels
20nA Supply Current

ISL54064IRUZ-T Applications


There are a lot of Intersil (Renesas Electronics America) ISL54064IRUZ-T Analog Switches & Multiplexers ICs applications.

  • Mechanical reed relay replacement
  • Multiplexers
  • Microprocessor Controlled Analog Systems
  • Channelized and Unchannelized DS3 applications
  • Audio and video signal routing
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Communication systems
  • Audio/video switches
  • Digital Cross-Connects
  • Multi-Line E1 Interface Cards

Write a review

Note: HTML is not translated!
    Bad           Good