Parameters |
Mount |
Surface Mount |
Number of Pins |
10 |
Published |
2001 |
Part Status |
Active |
Resistance |
1Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Supply Voltage |
6.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
30nA |
Max Supply Current |
100nA |
Throw Configuration |
SPST |
Turn On Delay Time |
39 ns |
Supply Type |
Single |
Turn-Off Delay Time |
27 ns |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
ISL54066IRTZ Overview
It has an internal resistance of 1Ohm. To find out what the 10 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 6.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. 1.8V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 30nA current. When the digital multiplexer is charged above 100nA, damage can occur. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.
ISL54066IRTZ Features
30nA Supply Current
ISL54066IRTZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL54066IRTZ Analog Switches & Multiplexers ICs applications.
- DSUs
- Microprocessor controlled systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Mechanical reed relay replacement
- New designs requiring multiplexer functions
- Low-Voltage
- Frame Relay Equipment
- Cable Modem
- Sample-and-hold systems
- Channelized and Unchannelized DS3 applications