ISL54501IHZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 6 |
| Resistance | 5Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 22 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| Off-state Isolation-Nom | 75 dB |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL54501IHZ-T Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel is used to provide high reliability. There are 6 terminations totally. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Internally, this switch multiplexer has a resistance of 5Ohm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. It is recommended to use 1.8V as the lowest voltage for the electrical part. The switch device would be able to operate with 20nA current. A voltage higher than 100nA may cause damage to the switch multiplexer. During operation, the multiplexer should not be exposed to a temperature above 85°C.
ISL54501IHZ-T Features
1 Channels
20nA Supply Current
ISL54501IHZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL54501IHZ-T Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- PDAs
- Medical
- Microprocessor Controlled Analog Systems
- Switching Systems
- Access Concentrators
- USB 1.1 signal switching circuits
- T1/E1 Terminals
- Relay Replacement
- Ultrasound
