banner_page

ISL54504IHZ-T

DUAL Analog Switches BREAK-BEFORE-MAKE 3V SOT-23-6


  • Manufacturer: Intersil (Renesas Electronics America)
  • Nocochips NO: 391-ISL54504IHZ-T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 283
  • Description: DUAL Analog Switches BREAK-BEFORE-MAKE 3V SOT-23-6(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Packaging Tape & Reel
Published 2001
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 2
Number of Terminations 6
Resistance 2.5Ohm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.95mm
Power Supplies 1.8/5V
Temperature Grade INDUSTRIAL
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Operating Supply Current 28nA
Max Supply Current 100nA
Throw Configuration SPST
Turn On Delay Time 25 ns
Supply Type Single
Turn-Off Delay Time 15 ns
Off-state Isolation-Nom 70 dB
Switching BREAK-BEFORE-MAKE
Normal Position NO
Height Seated (Max) 1.45mm
Length 2.9mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISL54504IHZ-T Overview


The electronic component is convenient to ship overseas because it is packed in a SOT-23-6. The advanced packaging method Tape & Reel provides high reliability. In total, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. In this multiplexer, the internal resistance is 2.5Ohm. The functions of 6 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.8V should be applied to the electronic component. This multiplexer would work with 28nA current. It may damage the digital multiplexer if the voltage is higher than 100nA. The switches should not operate in an environment where the temperature is higher than 85°C.

ISL54504IHZ-T Features


1 Channels
28nA Supply Current

ISL54504IHZ-T Applications


There are a lot of Intersil (Renesas Electronics America) ISL54504IHZ-T Analog Switches & Multiplexers ICs applications.

  • Medical
  • Modems
  • Wireless Local Loop
  • PDAs
  • Intelligent PBX
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Channel Banks
  • DVD-R
  • Routers
  • Central office

Write a review

Note: HTML is not translated!
    Bad           Good