ISL55004IBZ
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL55004 |
| Pin Count | 14 |
| Number of Circuits | 4 |
| Current - Supply | 8.5mA |
| Slew Rate | 300V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 600nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~30V ±2.25V~15V |
| Bandwidth | 220MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 70000 kHz |
| Average Bias Current-Max (IIB) | 3.5μA |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 1.2mV |
| Current - Output / Channel | 140mA |
| -3db Bandwidth | 200MHz |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Height Seated (Max) | 1.87mm |
| Length | 8.66mm |
ISL55004IBZ Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 14. Buffer amplifier has a total of 14 pins on it. Please take in mind that op amp should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amp consists of 4 circuits in total. As a recommendation, this electronic component should be used with a power supply that can deliver 8.5mA.
ISL55004IBZ Features
14 Pins
supply voltage of 15V
ISL55004IBZ Applications
There are a lot of Renesas Electronics America Inc. ISL55004IBZ Instrumentational OP Amps applications.
- Exponential operation circuits
- High speed sample
- Video amplifiers
- Weak signal detection
- Communication device
- High-frequency data acquisition systems
- Proportional counter tubes
- Blood pressure sensors
- Industrial control system
- Home audio systems
